2/4-Tier Log Locations Are In Different Locations And In User Directories
Change To Common Location Outside Of User Directories
ChangeDefaultRACLogLocations.docx (15.1 KB) Solution
- 2-Tier iiop Only
- start_imr.bat
- xxx\tc_root\iiopservers
- IS:
set TCSERVER_USER_DIR="c:\apps\siemens\temp\%USERNAME%\2tier \tao - WAS:
set TCSERVER_USER_DIR="%USERPROFILE%"\Teamcenter \TAO - 2/4-Tier
- Environmental Variables:
- NOTE: Tc 12.3+ ONLY
- set TC_SOACLIENT_DATA= c:\apps\siemens\temp\%USERNAME%\xtier\soaclient
- config.ini
- xxx\tc_root\portal\configuration
- IS:
osgi.user.area=c:/apps/siemens/temp/$USERNAME$/xtier/rac/user
osgi.instance.area=c:/apps/siemens/temp/$USERNAME$/xtier/rac/instance
osgi.configuration.area=c:/apps/siemens/temp/$USERNAME$/xtier/rac/configuration - WAS:
osgi.user.area=@user.home/Teamcenter/RAC/20220304115834
osgi.instance.area=@user.home/Teamcenter/RAC/20220304115834
osgi.configuration.area=@user.home/Teamcenter/RAC/20220304115834 - starttccs.bat
- xxx\tc_root\tccs
- IS:
set LOG_VOLUME_LOCATION=c:\apps\siemens\temp\%USERNAME% \xtier\tccs - WAS:
set LOG_VOLUME_LOCATION=%USERPROFILE% \Siemens\logs\tccs - fcc.xml
- xxx\tc_root\tccs
- IS:
<property name="FCC_LogFile" value="c:\apps\siemens\temp\$USER\xtier\fcc \fcc.log|/tmp/$USER/fcc.log" overridable="true"/>
…
<property name="FCC_CacheLocation" value="c:\apps\siemens\temp\$USER\xtier\fcc \FCCCache|/tmp/FCCCache " overridable="true"/> - WAS:
<property name="FCC_LogFile" value="$HOME \fcc.log|/tmp/$USER/fcc.log" overridable="true"/>
…
<property name="FCC_CacheLocation" value="$HOME \FCCCache|/tmp/FCCCache" overridable="true"/> - log4j2.xml
- xxx\tc_root\tccs\third_party\TcSS\TcSSxx.x.xxxxxxx\jars
- IS:
<Property name="LOG_DIR_ROOT">c:/apps/siemens/temp/${sys:user.name} /xtier/fcc/tcss</Property> - WAS:
<Property name="LOG_DIR_ROOT">${sys:user.home} /Siemens/logs/TcSS</Property>
Notes