NX NX CAM - Custom Column Configuration - Roles - Site/Users

2024-05-22T17:44:41Z
NX for Manufacturing

Summary


Details

How to Configure Columns in the "Operation Navigation" (ONT)

Solution

Please see the attached video. Instructions are below for your convenience.

  MB3 in the “White Space” in the ONT and select “Column Configuration”.


 Please review the video above. If you want to follow step by step instructions see below.    


--- The “Configure columns: Program Order” is displayed.


Note: The above configuration is for the Program Order View only.

Creating a New Configuration steps are below.

----   In this example, the “Channel” column will be removed.

o   Select “New” icon as seen in the image below.


The “New Column Configuration” dialog box is displayed.


--- After completing the “Level”, “Name”, and “Description”…select “OK”.

In this sample…”Channel” is selected and "Removed" from the current Column Configuration.

Please see image below.


In the above image... MyNewConfiguration is selected .... Channel is selected from the Column Configuration group... and Remove.


--- Select Save as seen in the image above and Select OK to complete saving the new configuration. Please see image below.


Note: The Channel column is no longer displayed in the ONT of the Program Order View.


The configuration will be saved in conjunction with the custom role.

--- Edit the “Roles” on the “Resource Tool Bar”.


--- Save the Role with the new column configuration.


--- Select File—>User Interface —> Roles and note the “Last Applied Role”.


Note: Test your new configuration against saving the role by closing and reopening NX.

--- The image below shows “MyNewConfiguration” is being used and “Channel” column is gone.


KB Article ID# PL8792545

Contents

SummaryDetails

Associated Components

Manufacturing General