While launching the Thread dialog inside NX, no dialog being displayed, and in the log file, below error is traced.
+++ Thread standard data not found. Check standards data installation.
The user has upgraded to NX2306 and has set the Hole standard variables to his below custom standard files.
From NX1926 onwards:
"nx502_Threaded_Hole_Standard.xml" standard file has been replaced by "NX_Thread_Standard.xml" file.
From NX 2206 onwards, "nx6.0_Drill_Size_Hole_Standard.xml" has been replaced by "NX_Drill_Size_Hole_Standard.xml"
Similarly "nx502_Screw_Clearance_Hole_Standard.xml" has been replaced by "NX_Screw_Clearance_Hole_Standard.xml" file.
So in NX2306, the user has to replace his earlier custom standard files with the above files and need to modify the respective standard files to enter his custom values.
Please refer to the below documentation.
https://docs.sw.siemens.com/en-US/doc/209349590/PL20221117716122093.modeling/hole_adv_hole_feat_tables_screw_rt
Please refer to the below documentation related to modifying/entering the custom values to these standard files.
https://docs.sw.siemens.com/en-US/doc/209349590/PL20221117716122093.modeling/xid2213342
https://docs.sw.siemens.com/en-US/doc/209349590/PL20221117716122093.modeling/xid2213352
https://docs.sw.siemens.com/en-US/doc/209349590/PL20221117716122093.modeling/xid2213347