NX Chamfering 2D Edges with Planar Mill Operation

2023-08-25T14:32:22Z

NX for Manufacturing

Summary

Details

How to Machine Unmodeled Chamfers from Noncontinuous 2D Edges Without Tool Repositioning

Solution

Create a "PLANAR MILL" operation with the following parameters:

Select a Chamfer Tool type.

Create Part Boundary (Selection Method=Points/Boundary Type=Closed/Tool Side=Outside).

Set negative "Part Stock" value to define chamfer size.

Specify Floor (this defines the tool depth).

Set Cut Pattern = Profile.

KB Article ID# PL8716525

Contents

Summary Details

Associated Components

Manufacturing General