NX Multi-Passes Multi-Depth Cut is not Available in Contour Area

A Contour Area operation is created. When Strategy is selected the Multi-Passes -> Multi-Depth Cut option is not available. Can this feature be turned back on?

It is possible to restore this Multi-Passes functionality using the following steps.

1. Enable Customer Default -> Manufacturing -> Operation -> Legacy -> Allow On-plane Stepover Option in Area Milling.

2. Set Main -> Containment -> Method to Non-steep and Stepover Applied to On Plane.

3. Turn on the Multi-Passes -> Multi-Depth Cut option.

4. Multi-Depth Cut is now available.