Dear Siemens Digital Industries Software Customer,
We are pleased to inform you that Robcad controllers for "USER_INVERSE/SAMESKIN98"
are available for download from https://download.industrysoftware.automation.siemens.com.
See Robcad_Controller_Name_changes_log.htm for details concerning this update.
Note: This file is located in the 'Change_Logs' folder directly under the 'Robot_Controllers' folder.
Use the following steps to download.
Note: A valid WebKey account is required.
(URL: https://www2.industrysoftware.automation.siemens.com/webkey)
In your browser address window enter the URL: https://download.industrysoftware.automation.siemens.com/
WebKey Username: [your WebKey user ID]
WebKey Password: [your WebKey password]
Select the Download tab
In the Product Filter area scroll down to Tecnomatix Products
Select Tecnomatix Products
Expand Product updates
Expand ROBCAD/
Expand Robot_Controllers/
Expand V11/
Expand USER_INVERSE/SAMES_KIN_98
Download the file(s):
ROBCAD_11.0_SAMESKIN98_v1.1_03_12_2019_PC.exe
To Install:
Place Robcad_<RobcadVersion>_<ControllerName>_NNBIT_vVV_MM_DD_YYYY.exe into a folder ($Tecnomatix/downloads is suggested, where $Tecnomatix is the full path to the Robcad installation).
Run Robcad_<RobcadVersion>_<ControllerName>_NNBIT_vVV_MM_DD_YYYY.exe.
The default installation point is C:\Robcad.
If you have any issues with the installation or support of these fixes,
please contact your local GTAC support group.
Sincerely,
Siemens Digital Industries Software
SFB-TECNOMATIX-8016392
Product Information:
- Product: TECNOMATIX , Application: ROBCAD , Version: V11.0R