Removing all gouges from the tool path.
Solution
- Select the operation with "MB3 "-->"Tool Path "-->"Edit ..."
In the Tool Path Editor dialog...
- Find the "Analyze Tool Path " group and select "Gouge and Collision Check "
- In the "Gouge and Collision Check " dialog box, find the "Clearance " group
- Specify a "Clearance " plane in order to move the selected gouge or gouges to the clearance plane specified.
- Select "Move to Clearance Plane "
- Select OK
- Select the operation with "MB3 "-->"Tool Path "-->"Gouge Check ..."
Note: The gouges have been removed.
- As a best practice, select the operation with "MB3 "-->"Tool Path "-->"Lock "
Notes