Error message: The level based IPW can not be found. regenerate the previous CM and ZL operations.
Solution
We are currently unable to use Level Based IPW with instanced operations
- resulting in the error message:
The level based IPW can not be found. regenerate the previous CM and ZL operations.
A workaround could be:
1. Copy the geometry, either in the part, or by creating assembly components at the positions required.
2. Create a geometry group of the operations required for each component.
3. Cut and paste the geometry group, and reference the part geometry required for each group.
Note that there is no associativity between the geometry groups
Notes
ER 1565101