Simcenter Micred T3STER Simcenter DynTIM is not working properly

2024-07-18T14:47:58.000+0900
Simcenter Micred T3STER

Summary

Use the methods below to check your equipment for failures.


Details

  1. Open the top cover of equipment.
  2. Turn on the tester and check the status of five LEDS on the control board.DynTIM_LED.jpg 
  3. Under normal conditions, the five LEDs should be lit, as shown in the image below. DynTIM_LED_Normal.jpg  
  4. An abnormal condition look like the image below. DynTIM_LED_Abnormal.jpg 

KB Article ID# KB000133729_EN_US

Contents

SummaryDetails

Associated Components

Simcenter DYNTIM