Aprisa Troubleshooting DRC Violations
2023-04-14T14:18:47.000-0400
Aprisa
Summary
This Support Kit experiments various Design Rule Checks (DRCs) errors and violations. Learn how to locate them in the layout and fix them using both Aprisa GUI and commands.
Details
Abstract:
This support kit includes the details listed below:- Understand Different DRCs and cause of DRCs in the design.
- Explore various checkers to easily categorize DRCs in Aprisa.
- Troubleshoot shorts, min spacing DRC between two nets
- Fix legalization DRCs such as cell overlaps.
- Understand usage of -nets switch in verify_layout and route -verify commands.
Version Information: AP 21.R1 or higher.
Included Files:
- Instruction document for this Support Kit named “Troubleshooting DRC Violations ” .
- One route_optimize database "route_optimize.proj" as a testcase to try all features of support kit.
Unpublished work. (c) 2023 Siemens
This software or file (the “Material”) contains trade secrets or otherwise confidential information owned by Siemens Industry Software Inc. or its affiliates (collectively, “SISW”), or SISW’s licensors. Access to and use of this information is strictly limited as set forth in one or more applicable agreement(s) with SISW. This Material may not be copied, distributed, or otherwise disclosed without the express written permission of SISW, and may not be used in any way not expressly authorized by SISW.
Unless otherwise agreed in writing, SISW has no obligation to support or otherwise maintain this Material. No representation or other affirmation of fact herein shall be deemed to be a warranty or give rise to any liability of SISW whatsoever.
SISW reserves the right to make changes in specifications and other information contained herein without prior notice, and the reader should, in all cases, consult SISW to determine whether any changes have been made.
SISW MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF INTELLECTUAL PROPERTY. SISW SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, LOST DATA OR PROFITS, EVEN IF SUCH DAMAGES WERE FORESEEABLE, ARISING OUT OF OR RELATED TO THIS PUBLICATION OR THE INFORMATION CONTAINED IN IT, EVEN IF SISW HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TRADEMARKS: The trademarks, logos, and service marks (collectively, “Marks”) used herein are the property of Siemens AG, SISW, or their affiliates (collectively, “Siemens”) or other parties. No one is permitted to use these Marks without the prior written consent of Siemens or the owner of the Marks, as applicable. The use herein of third party Marks is not an attempt to indicate Siemens as a source of a product, but is intended to indicate a product from, or associated with, a particular third party. A list of Siemens’ Marks may be viewed at: www.plm.automation.siemens.com/global/en/legal/trademarks.html
Support Center: support.sw.siemens.com
Send Feedback on Documentation: support.sw.siemens.com/doc_feedback_form