Simcenter Testing Solutions How to use an USB Remote Control for measuring with Simcenter Testxpress
2021-08-18T07:49:41.000-0400
Simcenter Testxpress
Summary
With an USB Remote Control SCx-RC01 you are able to control some actions in Testxpress. The function depends on the dialog or the used Template.
Details
Installation and Configuration :
1. Connect the Remote Control unit to an USB port of your PC
2. Start Testxpress
Testxpress Time Data
The following actions are linked to each of the four buttons of the Remote Control unit in Testxpress.
Important: Testxpress has to be the active Window on your PC to receive the Remote Control actions.
Testxpress Impact
Related Links
1. Connect the Remote Control unit to an USB port of your PC
2. Start Testxpress
The USB Remote Control has 4 buttons: Button 1: Yellow Button 2: Green Button 3: Red Button 4: Grey |
Testxpress Time Data
The following actions are linked to each of the four buttons of the Remote Control unit in Testxpress.
Important: Testxpress has to be the active Window on your PC to receive the Remote Control actions.
- Button 1: Scope
- Button 2: Record
- Button 3: Stop
- Button 4: Pause
Testxpress Impact
- Button 1: Record
- Button 2: Accept
- Button 3: Reject
- Button 4: Increment
Related Links
- What are the export formats available in Simcenter Textxpress
- How to set up Simcenter Testlab to measure CAN channels?
- How to connect your Simcenter SCADAS frontend to the PC?