Simcenter Amesim Choosing variables to print/save
2022-12-16T21:38:47.000-0500
Simcenter Amesim Automation Connect
Simcenter System Simulation Client for Git
Simcenter Amesim
Teamcenter Share
Summary
This article entails the procedure to select the variables for printing and eliminating ones that are not important.
Details
You can choose which variables you want AMESIM to save so that the result files’ size is monitored.
The procedure for this has been outlined using a sample simulation below.
Step1:
Go to simulation mode,
Step2:
Select all the components of the sketch (Ctrl+A)
Step3:
Right click and select “Save no variables”
Step4:
Select the components whose variables are of interest,
Step5:
Right click and select “Save All variables” or the variables you want to be saved.
The procedure for this has been outlined using a sample simulation below.
Step1:
Go to simulation mode,
Step2:
Select all the components of the sketch (Ctrl+A)
Step3:
Right click and select “Save no variables”
Step4:
Select the components whose variables are of interest,
Step5:
Right click and select “Save All variables” or the variables you want to be saved.