Simcenter STAR-CCM+ LMS Amesim/STAR-CCM+ co-simulation – Heat transfer in an internal combustion engine

Simcenter STAR-CCM+ Simcenter STAR-CCM+ Virtual Reality Teamcenter Share Simcenter Cloud HPC Simcenter STAR-CCM+ Viewer Simcenter STAR-CCM+ Application Specific Solutions



2017-12-20 16_41_37-LMS Amesim_STAR-CCM+ co-simulation – Heat transfer in an internal com….png

Delving deeper into the benefits of co-simulation between LMS Imagine.Lab Amesim and STAR-CCM+, this study shows the results of coupling a 1D thermal and combustion model of an engine with a 3D Finite Elements mesh in STAR-CCM+. The aim is to acquire detailed information about localized temperatures and heat exchanges, which would enable engineers to locate hot-spots and design out areas where cooling is suboptimal.

Additionally, the co-simulation is run over the NEDC cycle, with a particular focus on the start-up phase. This made it possible to get clear insights into the engine’s thermal behavior in the transient between ambient to operating temperatures.

Click here to access the presentation.

Please find more information on our website.

KB Article ID# KB000042785_EN_US



Associated Components

Design Manager Electronics Cooling In-Cylinder (STAR-ICE) Job Manager Simcenter STAR-CCM+